Angle Cleat Connection Design

Design standard: AS4100

Saved Projects

Loading projects...

Design Parameters

Minimum design shear of min(40 kN, 0.15 φVv) applied (AS 4100 9.1.4).
Seismic design inputs belong in this code’s engine.
0 = skip the beam-rotation check. Ix is calculated from the section.
Required for ASI Check 9 (local stability of a coped member).
Design thickness, e.g. 7.8 for 8 mm EA, 9.8 for 10 mm (nominal = rounded value).
Confirm against the selected code and bolt specification.
Clearance between the beam end and the support face; sets ae1.

Local capacity of supporting member (Check 10)

Same section, cleats and bolt line on the other side; common rows bolt through both cleats.

Elevation

Section

3D View

Drag to rotate, scroll to zoom, right-drag to pan. Pick a view to reset the camera.