Flush moment end plate (beam to column flange)

Design standard: EN1993 - SCI P398 (2013) Section 2; BS EN 1993-1-8:2005 6.2.4 - 6.2.7 and UK NA

Saved Projects

Loading projects...

Design Parameters

Load cases (major-axis moment hogging at the column face; axial + compression / - tension)

NameMoment (kNm)Shear (kN)Axial (kN)

Ultimate limit state design values. The moment is the design moment at the face of the column.

Not in the catalogue - enter it from the section tables. 0 ignores the root fillets (conservative: smaller plastic modulus).

ArcelorMittal Orange Book (UKB / UKC to BS 4-1, IPE / HE to Euronorm 19-57 / 53-62, angles to BS EN 10056-1).

Used in m, the compression width and the shear area; not in the catalogue - 0 is conservative.

The beam is bolted to the column flange (major axis). BS EN 10025-2 (S235 / S275 / S355, JR / J0 / J2); BS EN 10025-4 (S460M, sections and plate only); bolts BS EN ISO 898-1.

The bottom of the plate mirrors the top (moment reversal); the bolts below the compression flange carry the vertical shear.

For butt-welded flanges the leg is used only in the compression dispersion (2s); 0 = none.

Elevation

Section

3D View

Drag to rotate, scroll to zoom, right-drag to pan. Pick a view to reset the camera.